Stop Fuel and Chemical Leaks at the Source
Outperforms Dike Putty, Wedges, Foam and Magnetic Seals
Why RuptureSeal® Works
RuptureSeal® provides mechanical source control and stops active pressurized fuel and chemical leaks in under 20 seconds.
First responders choose RuptureSeal® for high-risk industrial fuel and chemical leak control, including:
- Truck saddle tank ruptures and fuel line leaks
- Forklift punctures and hydraulic fluid leaks
- Water, fuel, and chemical line bursts
- Chemical drum failures and IBC tote punctures
- Food-grade leaks and product transfer losses
- Oil pipeline leaks and hazardous releases
- Marine vessel breaches and fluid spills
Extreme Temperature Capability
Rated for 50°C to -50°C environments, it's reliable in cold weather, offshore, and high-heat industrial environments where rapid spill response is critical.
Outperforms Traditional Fuel and Chemical Leak Control Methods
Faster, lightweight, and easier to deploy than putty, wedges, hazmat foam, and magnetic leak seals.
Works on any surface—one-time use eliminates cross-contamination risk.
Non-leaching material prevents transfer into fluids—preserving product integrity and supporting operational continuity.
Maintains a seal against active pressure—up to 20 PSI—for hours in field conditions.
Clean, non-sparking, and non-destructive—resists vibration with no risk of splintering or chipping.
Compatible with over 40,000 chemicals.
Head-to-Head Product Performance Comparison (PDF)
Minimal storage. Maximum field readiness—where every second matters.
$0
Losses per minuteWHEN SECONDS MATTER GET RUPTURESEAL®
A 400L truck saddle tank puncture can exceed $15,000 per minute in spill response and remediation costs.
Every second matters. When safe to do so, control the source before it spreads.
- Dave Harris, Certified Director of Safety, Safety & Compliance Training and Medical Services Inc.
←Back to RuptureSeal® validated source control and regulatory alignment.
RuptureSeal®
|
Putty & Epoxy
|
Threaded Plugs
|
Football Shaped Plugs
|
Flexible Tapes
|
Wood Plugs
|
Magnetic Patches
|
|
|---|---|---|---|---|---|---|---|
| Deploys in under 20 seconds |
|
|
|
|
|
|
|
| Works on magnetic, non-magnetic & plastic |
|
|
|
|
|
|
MAGNETIC METALS ONLY |
| Performs on uneven, splintered & rough surfaces |
|
PSI LIMITED | PUNCTURE SHAPE LIMITED |
|
PUNCTURE SHAPE LIMITED | PUNCTURE SHAPE LIMITED | PUNCTURE SHAPE LIMITED |
| Compatible with 40,000+ chemicals and fuels |
|
|
LIMITED CHEMICAL COMPATIBILITY |
|
WATER ONLY |
|
LIMITED CHEMICAL COMPATIBILITY |
| Extreme Temperature range -50ºC to 50ºC |
|
|
|
|
WATER ONLY |
|
LIMITED TEMPERATURE RANGE |
| No tools required |
|
|
TOOLS REQUIRED | WATER REQUIRED |
|
|
|
| 30 second non-destructive removal |
|
|
|
|
|
|
|
| No personal or environmental limitations |
|
|
|
|
WATER ONLY |
|
LIMITED TEMPERATURE RANGE |
| Seals to 20 PSI |
|
UNDER 10 PSI |
|
UNDER 10 PSI | UNDER 10 PSI | UNDER 10 PSI |
|
Industry leading deployment speed
Less than 20 seconds and far faster (and cleaner) than other products. Response time is critical to improve safety, environmental impact and cleanup costs.
Lowest removal cost
After a spill, the leak site must be cleaned and secured. Simply cut away and discard. Urethane plugs and putties must be chiselled out, requiring tools and valuable time to remove.
Performance Matters
When speed and safety matter in the field, RuptureSeal® is the low-training, accessibility-friendly source control solution built for reliable performance in critical situations.
Easy-to-follow instructions
