Stop Fuel and Chemical Leaks at the Source

Outperforms Dike Putty, Wedges, Foam and Magnetic Seals

How RuptureSeal® Works

RuptureSeal® mechanically seals fuel and chemical leaks in seconds—delivering true source control for active leaks at the point of failure.

First responders choose RuptureSeal® for high-risk industrial fuel and chemical leak control, including:

Truck saddle tank ruptures and fuel leaks
Forklift punctures and hydraulic fluid leaks
Water, fuel, and chemical line bursts
Chemical drum failures and IBC tote punctures
Oil pipeline leaks and hazardous releases
Marine vessel breaches and onboard fuel spills

Extreme Temperature Capability

Rated for 50°C to -50°C environments, it stops a leak fast in cold weather, offshore, and high-heat industrial environments where rapid spill response is critical.

Outperforms Traditional Fuel and Chemical Leak Control Methods

Faster, easier, and more effective than putty, wedges, hazmat foam and magnetic leak seals.

Works on any surface with no risk of cross-contamination.

Maintains a seal against active pressure—up to 20 PSI—for hours in field conditions.

Clean, non-destructive removal.

Compatible with over 40,000 substances.

Minimal storage. Maximum field readiness—where every second matters.

2" PUNCTURE

$0

Losses per minute

WHEN SECONDS MATTER GET RUPTURE SEAL®

Old Control Methods (minimum 2 minute deploy time)

Rupture Seal® (average <20 second deploy time)

For fleets, a 400L truck saddle tank puncture can cost more than $15,000 per minute. Every second matters.

←Back to Rupture Seal® source control and regulatory alignment.

	Compound & Putty	Pipe Plugs & Screws	Sealing Tapes
Deployment speed less than 20 seconds
Deployment speed less than 1 minute
Mechanical seal to any ruptured surface
Full fuel & chemical compatibility	LIMITED	LIMITED	WATER ONLY
Temperature range from -50ºC to 50ºC
No tools required
Deployed unit removal less than 30 seconds
No personal or environmental limitations

Industry leading deployment speed

Less than 20 seconds and far faster (and cleaner) than other products. Response time is critical to improve safety, environmental impact and cleanup costs.

Lowest removal cost

After a spill, the leak site must be cleaned and secured. Simply cut away and discard. Urethane plugs and putties must be chiselled out, requiring tools and valuable time to remove.